Trouble Shooting - FujiFilm Instax Square SQ6 Manual De Instrucciones

TROUBLE SHOOTING

★When to replace the batteries
1 When the lens does not work when the power is switched on.
2 When it takes an unusually long amount of time for the flash to be charged.
3 When pressing the shutter button turns off the camera.
* Replace both CR2 batteries with new lithium batteries of the same brand/type.
TROUBLE SHOOTING
During operation
Problems
1 The battery power is low.
The shutter release
won't trip. 2 The LED on the flash suppressing
3 The film counter is showing "0" sign.
The LED(s) on the
● The camera has some trouble.
mode indicator is
flashing.
1 The film pack is not for your camera.
The film pack won't
load into your 2 You are not loading the film pack
camera, or won't load
into your camera
smoothly.
The film cover cannot ● The battery power is low.
be ejected.
Possible Causes
button or the self timer lamp is flashing
rapidly.
correctly.
Solutions
1 Replace both batteries with new batteries.
2 The flash is charging. Please wait until the LED
or lamp turns off.
3 Unload the film pack, and load a new film
pack.
1 Remove the batteries and reinsert them with
the LED flashing.
2 If 1 does not resolve the problem, contact a
FUJIFILM authorized distributor.
1 Use FUJIFILM Instant Film "instax SQUARE"
only. (No other films can be used.)
2 Match the yellow line on the film pack with
the yellow positioning mark in your camera.
Follow the FUJIFILM Instant Film "instax
SQUARE" instructions.
● Replace both batteries with new batteries and
load the film pack again.
EN
17