Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ES
FR
ENG
4 . 4 . P L U S / m I N U S W E I G H I N G
This function can be used for unit weight control, fabrication control etc.
>
Turn on balance using the
>
Put the nominal weight on the weighing plate and tare to zero by pressing the
nominal weight.
>
Put the test objects subsequently on the weighing plate, the respective deviation from the nominal
weight is displayed with the sign "+" o "-".
>
According to the same procedure also packages with the same weight can be produced, referring to a
nominal weight.
>
Back to weighing mode by pressing the
4 . 5 . PA R T S C O U N T I N G
>
Turn on balance using the
>
Press the
UNIT/COUNT
more reference quantities 10, 20, 25 and 50 can be called up.
>
Place the same number of pieces to count on the weighing plate as the set reference quantity
requires.
>
Confirm with
SET/TARE
>
The balance is now in parts counting mode counting all units on the weighing plate.
UNIT/COUNT
>
By pressing the
the counted units.
Important: The larger the reference quantity, the more accurate the parts counting.
If the weight is less than the minimum unit weight, the display appears
weighing mode. For minimum unit weight, see table "Specifications".
Tare vessels can also be used for piece counting. Pre- tare the weight of the tare vessel prior to piece
counting.
4 . 6 . n e t - t o ta l W e i g H i n g
It is useful if a mixture of several components is weighed into a tare vessel and finally the sum weight of
all weighed components is necessary for control purposes (net-total, i.e. the weight of the tare vessel).
E x A m P L E
>
Turn on balance using the
>
Put tare vessel onto weighing plate, tare with
>
Weigh component. Press the
left side of the display.
>
Weigh component. Press the
displayed.
>
Tare to zero using the
of components and will be displayed.
>
If necessary, repeat above procedures to complete the formula up to the desired final value. Repeat.
>
Back to weighing mode by pressing the
4 . 7 . P E R C E N TA G E W E I G H I N G
Display symbol: %
Percent weighing allows to display weight in percent, in relation to a reference weight.
>
Turn on balance using the
UNIT/COUNT
>
Press the
100
until
% is displayed.
>
Place the reference item on the weighing pan.
SET/TARE
>
Press
key, the weight of the item is taken over as reference (100%).
>
Now you can place the test objects onto the weighing plate; the percentage is displayed.
>
Back to weighing mode by pressing the
26
ON/OFF
key and wait for the
ZERO
key.
ON/OFF
key and wait for the zero display.
key until balance displays
key.
key the balance returns to the weighing mode and displays the weight of
ON/OFF
key and wait for the
SET/TARE
key. Display shows zero with the memory icon, triangle, on the
SET/TARE
key. Net-total, sum weight of the components and will be
SET/TARE
key. Weigh component. Press the
SET/TARE
ON/OFF
key and wait for the zero display.
key until balance displays
UNIT/COUNT
Multi-functional balances
ZERO
display.
5 PCS
. By pressing the
UNIT/COUNT
Er 1
. Use
ZERO
display.
ZERO
key to zero.
SET/TARE
key.
5 PCS
UNIT/COUNT
. Pressing the
key.
ANF-AND-ANG
ZERO
key. Remove the
key several times,
UNIT/COUNT
key to return to
key. Net-total, sum weight
key several times,
User's guide
Publicidad
Tabla de contenido
