Sedus quarterback Instrucciones De Uso página 3

quar t er b a c k
Instructions for use
A Height of the seat
®
Lowering the seat:
(the seat will drop slowly)
will lock the position
®
Raising the seat:
rise slowly)
position
B Height of lumbar support
®
1.
model turn both levers up or down simultaneously
C Depth of lumbar support on mesh and slim versions (optional)
®
1.
D Angle of the backrest
®
Adjusting the backrest dynamically:
release it
®
Locking the backrest into position:
reaches the desired angle
lock the backrest into position
E Strength of the backrest pressure
®
1.
on the seat and backrest
downwards until the desired position is achieved (greater backrest
pressure) or upwards (lesser backrest pressure)
F Depth of the seat (optional)
®
1.
desired position
G Seat angle (optional)
®
1.
(chair tilts 4° forwards) or swivel downwards and lock into place
(seat moves back into its original position)
H Adjusting the basic armrests (optional)
®
Height:
the armrest
®
Adjustable seat width:
key (TX40)
I Adjusting the 3D armrests (optional)
®
Height:
button to engage the armrest
®
Depth: Push the armrest cover backwards or forwards to engage
®
Swivelling armrest covers: up to 15° inwards and outwards;
also swivels 360° with more force; a 180° turn changes the width
between the armrests
®
Adjustable seat width:
key (TX40)
J Adjustment of the headrest (optional)
®
Adjusting the headrest height: Push the headrest to the desired height
(it is continuously adjustable)
®
Headrest angle: Adjust the tilt of the headrest as desired
K Mounting the clothes hanger (optional)
®
Hook the clothes hanger in at the tapered position on the telescopic
neckrest adjustment and press it down.
The functions of the swivel chair
H
D
1.
Releasing the lever at the desired height will lock the
3.
Disengage backrest
Disengage backrest
Lean against the backrest
2.
Adjusting the backrest dynamically
Press the finger plate and hold it fast
3.
Stand up Swivel the lever backwards and lock into place
2.
Press the button underneath the armrest, lift or lower
1.
Release the button, the armrest locks into place
2.
Position the armrests
2.
Press the button, lift or lower the armrest
1.
Position the armrests
2.
B C
G
Sit down on the seat
1.
Releasing the lever at the desired height
3.
Stand up Pull the lever upwards (the seat will
2.
Adjust lumbar support/on fully upholstered
2.
Turn inlay to increase or decrease support
2.
Press the lever down and release it to
2.
Crank the quick adjustment mechanism
3.
Release the finger plate, and the seat will engage
Loosen the screws slightly with a Torx
1.
Loosen the screws slightly with a Torx
1.
J K
Pull the lever upwards
2.
Pull the lever upwards and
1.
The backrest is free-floating
3.
Lean back until the backrest
1.
Exert only slight pressure
2.
Push the cushion to the
2.
Retighten the screws
3.
Retighten the screws
3.
B C
Release the
2.
I
F
A
E