Panasonic DIGITAL Palmcorder PV-GS69 Instrucciones De Operación página 44

• The [ ] Indication and the One-Touch
Navigation icon appears.
2
Move the Joystick Control [▲] to select
[ ].
• The White Balance indication appears. ([
etc.)
S P
►
1 2 : 3 4 : 5 6 A M
J A N 2
3
Move the Joystick Control [◄] or [►] until
the [ ] Indication is displayed.
S P
►
1 2 : 3 4 : 5 6 A M
J A N 2
4
Point the Camcorder at a full-screen white
subject.
5
Move the Joystick Control [▲] until the
[ ] Indication stops fl ashing.
To Resume Automatic Adjustment
Move the Joystick Control [◄] or [►] until the
[ ] Indication appears. Or, set the [AUTO/
MANUAL/FOCUS] Switch to [AUTO].
About White Balance Sensor
The White Balance Sensor
nature of the light source during recording.
1
44
[One-Touch Navigation icon]
WB
IRIS SHTR
5/5 NEXT
]
3 h 5 9 m 5 9 s 2 9 f
R 2 : 0 0
WB WB
< >
BACK
2 0 0 6 1 0 0
3 h 5 9 m 5 9 s 2 9 f
R 2 : 0 0
WB WB
< >
BACK
2 0 0 6 1 0 0
determines the
1
• Do not cover the White Balance Sensor with your
hand during recording because White Balance will
not function normally.
Outside of the effective range of Automatic White
Balance Adjustment, the image will become
reddish or bluish. Even within the effective range of
Automatic White Balance Adjustment, the Automatic
White Balance Adjustment may not function properly
if there is more than one light source. In this case,
adjust the White Balance.
1) The effective range of Automatic White Balance
Adjustment on this Camcorder
2) Blue sky
3) Cloudy sky (rain)
4) TV screen
5) Sunlight
6) White fluorescent lamp
7) Halogen light bulb
8) Incandescent light bulb
9) Sunrise or sunset
10) Candlelight
Notes:
• When the Camcorder is turned on with the Lens
Cap attached, the automatic White Balance
adjustment may not function properly. Please turn
the Camcorder on after removing the Lens Cap.
• When setting both the White Balance and the Iris/
Gain, set the White Balance first.
• Whenever recording conditions change, re-set the
White Balance for correct adjustment.
In the following cases, you cannot change
White Balance:
• When you set the Zoom higher than 30×
• When you display a Menu
• When you use the MagicPix Mode