Keyboard; Led's; Indicators; Display - Circutor MD-5060e Guia Del Usuario

Keyboard

)- FILTER. Eliminates noise interference.
*- V-TEST. Allows to program Voltages tests.
+- VOLTMETER. When pressed, it indicates that the
instrument is at the voltmeter function.
,- LIM. The instrument indicates with a sound signal.
when R< 100MΩ
-- BATTERY CHECK.
.- TIMER. the test will be stopped automatically after one
minute.
/- HOLD. When pressed, the instrument displays the last
resistance reading done.
0- Enable/Disable the PRINT function
1- ON/OFF key.
2- 500V voltage test.
3- 1kV voltage test.
4- 2,5kV voltage test.
5- 5kV voltage test.
6- DECREASE. Decrease test voltages in 500V steps.
7- INCREASE. Increase test voltages in 500V steps.
8- START key.
9- PI. Polarization Index.
:- STOP key.
;- DAI. Dielectric Absorption Index.

Indicators

Display

Alphanumeric LCD where the test number, measurement results, the measuring unit, the time indication (in minutes and
seconds), the analogue indication by means of a bar-graph and messages to the operator are displayed.
messages to the operator
test number
measurement results
measuring unit
analogue indication
(bar-graph)

Led's

<- Indicates FILTER key on
=- Indicates V TEST key on
>- Indicates LIM key on
?- Indicates BATTERY CHECK key on
@- Indicates TIMER key on
A- Indicates HOLD key on
B- Indicates PRINT key on
C- Indicates that the HIGH VOLTAGE is ON the terminals.
In this moment is necessary increase the safety warn-
ings.
D- Indicates that the selected voltage is 500V
E- Indicates that the selected voltage is 1kV
F- Indicates that the selected voltage is 2,5kV
G- Indicates that the selected voltage is 5kV
H- Indicates START key on
25
time indication
selected voltage
messages to the operator