Technical Description - Dometic GROUP WAECO PerfectView Switch200VTO Instrucciones De Montaje

Technical description

PerfectView SWITCH200VTO
5 Technical description
SWITCH200VTO is designed to connect any camera with WAECO plug connectors to a
monitor or lorry multimedia navigation systems.
The control box has two camera inputs and provides a video trigger signal in addition to
the switched video and audio signal, when one of the two inputs is active. The control box
also features:
 trailer detection on the second camera input
 the option to mirror the camera image manually if the connected camera supports this
 the option to switch between long-distance and close-up manually provided the con-
nected camera supports this
You can select the camera inputs manually using the rocker switch or automatically using
the reverse trigger.
When selecting the camera input automatically using the reverse trigger, input 1 is auto-
matically selected for one connected camera. If two cameras are connected, the second
camera input is automatically selected due to the trailer detection. If you need to switch
between the two cameras, it has to be done manually using the switch.
You can set the switchover time for switching between the two camera inputs manually
using a rotary potentiometer.
In default mode, the camera is activated when you switch on the monitor or engage the
reverse gear. The monitor is also activated when you engage the reverse gear.
If you would like to use the camera when the vehicle is parked or when driving forwards,
you must install the supplied rocker switch.
You can connect the control box to 12 V to 32 V DC voltage.
EN
20