Connecting The Power Cord - Invacare MicroAIR MA50CE Serie Manual Del Usuario

4 OPERATION
4.4

Connecting the Power Cord

WARNING
DO NOT alter plug to fit a non-conforming outlet. Instead, have an electrician install a properly grounded outlet. Failure to use the
correct plug and outlet can result in a potential safety hazard.
CAUTION
Ensure that the power cord of the control unit is not pinched, or has any objects placed on it. Ensure the power cord has been secured
in the cable management system located along the side of the overlay.Ensure it is not located where it can be stepped on or tripped over.
1. Examine the hospital grade power cord supplied with the control unit.
2. Perform one of the following:
• If the plug shows signs of damage or the cord insulation is damaged/pinched - Call your supplier for a replacement hospital grade cord.
• If the plug is not damaged - Plug the end of the supplied hospital grade power cord into the power outlet on the side of the control unit.
3. Plug the other end of the plug into a properly grounded outlet on the wall.

Make sure the control units power inlet connection is positioned to easily disconnect the power cord from the unit.
Invacare® MA50CE Series
Power Inlet
18
Part No 1176084