Technical Data; Equipment / Accessories; Start-Up; Changing The Threaded Mandrel (Fig. 3) - Gesipa FireBird Pro S Manual De Instrucciones

2.4

Technical data

Weight
Max. setting stroke
Drive unit
Traction power
Noise emission
Vibrations
2.5

Equipment / accessories

Threaded mandrels and nosepiece
for FB Pro S
for FB Pro S GE
Tool
Suspension loop
Battery charger
Battery (quick-change)
3.

Start-up

Prior to operating the riveting tool, you must choose the correct nosepiece and threaded man-
drel that are suitable for the nut dimensions.
3.1

Changing the threaded mandrel (Fig. 3)

• Remove the battery from the tool
• Loosen lock nut C using double open-ended spanners (WAF 24/27)
• Unscrew nosepiece B.
• Push back slide G as far as it will go.
• Unscrew threaded mandrel A
• Screw in the suitable threaded mandrel. Align the surfaces of the hexagon on the
screwed-in threaded mandrel A with the surfaces of the hexagon of slide G.
• Secure nosepiece B which is suitable for the thread dimensions with lock nut C.
2.4 kg incl. battery
10 mm
Brushless direct current motor
15 kN for FB Pro
20 kN for FB Pro GE
L 76,5 dB (A), Measurement uncertainty K = 3 dB
pa
< 2,5 m/s², Measurement uncertainty K = 1,5 m/s²
M6 in working position
M4, M5 in the nosepiece holder
M10 in working position
M8, M6 in the nosepiece holder
Hexagon screwdriver WAF 4
2 double open-ended spanners, WAF 24/27 and WAF 27/30
Concealed in housing
100-240 V ~ / 50-60 Hz
18,0 V; 2,1 Ah
GB
21