Operating the tuner
➔
Press the softkey
"Tuner" menu (next to "Mono").
•
: The mono operation is
activated. Weak, noisy sta-
tions are played back more
clearly.
•
: The stereo operation is
activated. You are listening in
stereo if the station broad-
casts in stereo.
Note:
If you switch on the device, this
setting is automatically set to
stereo operation.
Allowing alternative frequencies
( RDS)
The device can automatically
switch to an alternative frequency
(AF) of the same station if the re-
ception becomes poor.
➔
Press the softkey
"Tuner" menu (next to "RDS").
•
: The device automatical-
ly adjusts the best receivable
frequency of the station, pro-
vided that the station sup-
ports the "AF" RDS function.
•
: The device does not
change the frequency.
Searching FM stations automat-
ically and storing them in the
FMT memory bank ( Travelstore)
You can automatically store the
six FM stations offering the
28
9
in the
;
in the
strongest reception in the region
in the FMT memory bank.
➔
Press the softkey
"Tuner" menu (next to "Travel-
store").
"Travelstore" appears on the
display. The tuner automatical-
ly searches for the six strong-
est FM stations and stores
them in the FMT memory bank.
After the storing is completed,
the radio plays the station at
memory location 1 of the FMT
level. Stations that were previ-
ously stored in the FMT mem-
ory bank are automatically de-
leted.
Activating/deactivating im-
proved reception ( Hicut)
The Hicut function improves re-
ception during poor radio recep-
tion (for FM only).
➔
Change to the second page of
the "Tuner" menu by pressing
the NEXT button
➔
Press the softkey
"Tuner" menu (next to "Hicut")
several times.
•
"1": The Hicut function is
switched on and has a low
response sensitivity. If the re-
ception is very poor, the in-
terference level is automati-
cally decreased.
:
in the
6
.
7
in the