Yamaha R-N301 Manual De Instrucciones página 37

Ocultar thumbs Ver también para R-N301:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

■ Network Name
Edits the network name (the unit's name on the network)
displayed on other network devices.
1
Select "Network Name".
Network
¡ Network Name
2
Press ENTER to enter the name edit display.
Network
R-N301 XXXXX
Network name
3
Use the cursor keys (D / E) to move the edit
position and the cursor keys (B / C) to select
a character.
Network
R-N301 XXXXX›
4
To confirm the new name, press ENTER.
5
To exit from the menu, press SETUP.
■ Update
Updates the firmware via the network.
Starts the process to update the unit's firmware.
Perform
For details, see "Updating the unit's firmware via
Update
the network" (p.37).
Displays the version of the firmware installed on
Version
the unit.
Displays the system ID number.
ID
Tone Control
Adjusting the high and low frequency response.
Bass
SP A
Treble
Balance
SP A
Adjusting the sound output balance of the left and right
speakers to compensate for sound imbalance caused by
speaker locations or listening room conditions.
Control range
L+10 to R+10
y
For details, refer to the "Adjusting the speaker balance" (p.17).
Max Volume
SP A
Sets the maximum volume to prevent excessive loudness.
Setting range
1 to 99 (1 step increments), Max
Default
Max
Initial Volume
Sets the initial volume when the receiver is turned on.
Setting range
Off, Mute, 1 to 99 (1 step increments), Max
Default
Off
DC OUT
Configures the DC OUT jack setting.
PowerMode
Selects how to supply power to the Yamaha AV accessory
connected to the DC OUT jack.
Con
(default)
Sync
Configuring various functions (Setup menu)
When you feel there is not enough bass (low
frequency sound).
Control range: –10 to +10 (20 Hz)
When you feel there is not enough treble (high
frequency sound).
Control range: –10 to +10 (20 kHz)
Supplies power through the DC OUT jack
continuously regardless of the power state (on/
standby) of the unit.
Supplies power through the DC OUT jack only
when the unit is turned on.
35
En

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido