Preparing The Machine For Operation; Installation Instructions; Installing The Right Hoe - Stihl MH 600 Manual De Instrucciones

Ocultar thumbs Ver también para MH 600:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 193
Item
Designation
M
Special bolt M12
N
Guard plate holder, right
O
Guard plate holder, left
P
Guard plate holder
Q
Cable tie
R
Folding retainer
S
Screw clamp
T
Lock nut
U
Washer
V
Bolt M8x90
W
Bolt M8x65
X
Bolt M8x20
Y
Bolt M8x16
Z1
Bolt M5x12
Z2
Bolt M12
Instruction manual
Engine instruction manual
Installation tool
54
Qty.
7. Preparing the machine for
1
operation
1
1
1

7.1 Installation instructions

7
Risk of injury!
2
Observe the safety instructions in
2
the "For your safety" section. (
In particular, detach the spark plug
15
socket and always wear thick
15
gloves when carrying out any work
1
on the hoes and wheels.
1
Observe the specified torque!
8
Drive cables and throttle cable are
1
already installed and attached.
3
Incorrectly installed cables
1
(e.g. incorrect routing or attaching
1
to the wrong drive lever) may
cause malfunctions.
1
1
● Perform all the operations described on
a clean, flat, level and firm surface.
● Observe installation positions – always
ensure that the machine is standing
stably and securely.
● Strictly observe instructions for cable
installation. In particular, fasten all
cables to the handlebar using cable
ties in order to prevent damage to the
machine (e.g. when folding down the
handlebar) or possible malfunctions.

7.2 Installing the right hoe

Risk of injury!
Hoes and running wheels must
always be installed in pairs. Never
install a hoe on one side and a
running wheel on the other side.
Strictly observe the installation
instructions. In particular, observe
the installation sequence and install
the hoe and folding retainer
completely as described. When
installing the folding retainer, strictly
observe the correct direction of
insertion and positioning of the
securing clip, as shown. In the case
4.)
of incorrect or rotated installation,
the folding retainer may come loose
and be lost.
For good working results, the
cutting edges of the hoes must
point forwards (not towards the
handlebar) – observe markings.
● Lift basic unit (A) with the help of a
second person.
0478 404 9602 A - EN

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido