Toto TB100DF Manual De Instrucciones Y Del Propietario página 5

4) Secure the mounting brackets to the
floor with the included self-tapping
screws, using the provided screw
anchors if necessary.
Tighten the locknuts against the
mounting brackets, then lower the
escutcheons over them.
5) Loosen the set screw on the top outlet
of the tub filler, push the spout firmly
into the outlet, and tighten the set
screw to secure it.
6) Fasten the adapter onto the tub filler
diverter.
Place the gasket inside the short nut on
the handshower hose and fasten the
handshower hose onto the adapter.
Connect the handshower to the free
end of the handshower hose.
7) Turn on water supply and check all connections for leaks. Test the tub filler and the
handshower for proper operation.
If the temperature control operates with the cold and hot switched, verify that the
supply hoses are connected to the proper supply lines.
Installation Procedure (continued)
Adapter
Gasket
5
Spout
Set Screw
Handshower
Hose