Technical Specifications - Hudora 14240 Instrucciones De Montaje

INSTRUCTIONS ON aSSEMBLY aND USE
EN
CONGRaTULaTIONS ON PURCHaSING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral component of
the product. Therefore, please store them and the packaging carefully in case questions
arise in the future. Please always include these instructions when handing on the product
to a third party. This product must be assembled by an adult. This product is not designed
for industrial use. The use of the product requires certain capabilities and skills. Always
adjust according to the age of the user and use for the purpose it has been designed for.

TECHNICaL SPECIfICaTIONS

Item: HUDORA Bold Wheel Cushion (Wheel size: 230/180 mm)
Item number: 14240, 14241, 14242, 14243
Dimensions: approx. 95.5 cm in length, deck. approx. 33 x 15 cm
Weight: ca. 5.2 kg
Class: A, 100 kg maximum user weight
If you have assembly problems or would like further information on the product, we have
all you need and more at http://www.hudora.de/service.
CONTENTS
1 x Scooter | 1 x Instruction leaflet
Other parts which may be included with the delivery in some circumstances are not re-
quired.
SafETY INSTRUCTIONS
• Wear suitable protective clothing for your own safety. Wear personal protective equip-
ment. This includes at least: hand/wrist guards, knee pads, head protection and elbow
pads. Never use the scooter without shoes!
• The scooter is only intended for use by one person.
• Only use the scooter on surfaces that are suitable for it, i.e. those which are flat,
clean, dry, and use the scooter where possible away from other road users. Avoid slo-
ping ground. The brakes may become hot if the scooter has been used for a while!
Your footwear could be damaged! The brakes shouldn't be touched until they have
cooled down.
• Always be considerate of others.
• Before you begin – Ensure that all fasteners and locking parts are intact and tight,
e.g. the folding mechanism and the height setting of the handlebar. The functions of
self-securing screw threads can be impaired after repeated loosening and tightening
of the connecting elements. Check especially for the correct alignment and fastening
of the steering set-up. You should also check the firmness of the spring at regular
intervals.
• Make sure that the stand is folded safely while driving.
• Do not use the scooter at twilight, at night or in poor visibility. Do not use it on roads
or thoroughfares or on slopes or hills. Avoid being in the proximity of stairs and open
water.
• The scooter is not suitable for jumps.
• Children should only use the product when they are under adult supervision.
• Prior to using the scooter, please inform yourself about restricting applicable traffic
regulations for the intended area of application. The scooter is intended for use on
footpaths.
• The use of the product requires specific skills and knowledge to be able to avoid inju-
ries due to crashes and collisions.
INSTRUCTIONS ON aSSEMBLY
No tools are required to assemble the product. The scooter is delivered in its transport
form (folded)! (Picture 1)
PLEASE PROCEED AS FOLLOwS TO GET THE SCOOTER READY FOR USE
• Push the slide control in the folding mechanism upwards. The mechanism should be
relaxed - to release you should rather have a foot on the brake instead of on the foot-
board! (Picture 2)
• Fold in the scooter by moving the handle bar towards the footboard until it audibly
clicks into place.
• Insert the handlebar grips into the T-section of the handlebar stem. Use your thumbs
to press down both locking buttons until the the grips can be easily pushed into the
T-section. Turn the handlebar grips until the locking buttons are positioned in the two
openings intended for them and you hear them click into place. Check that both hand-
lebar grips are fitted correctly by pulling both outwards. If they do not move, they have
been assembled in accordance with the instructions. (Picture 4)
• Loosen the quick release lock on the handlebar rod by pushing the lever of the quick
release lock until the lever is parallel to the handlebar grip. (Picture 5)
• The handlebars can be locked into place at different heights. Pull the handlebar rod
out of the handlebar stem until it is at the required height and the relevant button
has snapped into place. (Picture 7) The maximum height cannot be exceeded due to
the integrated lock. If the handlebar does not sit firmly at the required height, open the
quick release lock again and turn it a few times so that the fastening bracket fits more
tightly to the handlebar rod. Repeat this process until the handlebar rod can be aligned
securely. (Picture 6)
• Now close the quick release lock by pushing the lever down to the handlebar stem.
• Always check all parts before use to ensure they are fitting tightly, particularly the
folding mechanism, the handlebar locking and the wheels.
All images are examples of the design.
TO GET THE SCOOTER READY FOR TRANSPORT AGAIN,
PLEASE CARRY OUT THE FOLLOwING ACTIONS
• Loosen the quick release lock by pushing the lever of the qucik release lock away from
the handlebar stem.
• Please press the locking button so that the handlebar rod can be moved. (Picture 7)
• Push the handlebar rod as far as it will go into the handlebar stem.
• Close the quick release lock by pushing the lever down to the handlebar stem.
• Use your thumbs to press both locking buttons in the handlebar grips and pull the
handlebar grips outwards until they are released completely from the T-section.
(Picture 4)
• Push the handlebar grips down until they are parallel with the handlebar shaft.
• Push the slide control in the folding mechanism upwards. Do not thereby pull on the
handlebars - the system should be relaxed. The slide control will loosen. (Picture 2)
• Fold in the handlebar of the scooter forwards until the controller audibly clicks into
place. (Picture 3)
USaGE INSTRUCTIONS
NOTHING'S EASY AT FIRST ...
... most accidents happen to "beginners" within the first ten minutes. Particular care
should be taken during this stage.
DRIvING INSTRUCTIONS
The scooter moves when a foot is used to regularly push off, just as with well-known
children's scooters. Braking is no problem either - simply step on the friction brake over
the back wheel (mudguard).
We recommend folding the scooter by hand after each use or using the stand. Its use is
ensured through simply folding and unfolding. Aluminium is a good and light material but
should also be handled carefully as it is not as hard as steel, for example.
MaINTENaNCE aND STORaGE
Use a dry or damp cloth only to clean the product; do not use special cleaning agents! Check
the product for damage or traces of wear and tear before and after each use. Do not make any
structural changes. For your own safety, please use original spare parts only. These can
be sourced from HUDORA. If parts become damaged or if sharp edges or corners should
develop, the product may not be used any more. If in any doubt, please contact our ser-
vice team (http://www.hudora.de/service). You can also procure over our service wear
parts such as handles, brake plates and mud flaps. Store the product in a safe place
where it is protected from the elements, cannot be damaged, and cannot injure anyone.
Replace damaged or worn assembly parts in order to ensure the safety of your scooter.
wHEEL CHANGE
Replacement wheels are available as accessories from http://www.hudora.de/service
and should be replaced when they are worn down. To change the wheels, loosen the axle
fitting with two Allen keys and take the wheels off the axle. A screwdriver or Allen key can
be used to push the bearings out of the wheel to use them in the new wheel. However, it
is usually advisable to change the bearings when the wheels are changed. Put the bea-
rings into the new wheel with the bolt spacer and mount them to the frame with the axle
screws. Make sure the axle has been screwed on tightly before starting again!
BEARINGS
Your scooter is equipped with precision ball bearings which were filled with lubrication at
high pressure during manufacture. For this reason, the wheels only run easily and quickly
when there is a load on the scooter. The bearings are maintenance free. If a bearing
should fail, it should be replaced completely. Bearings are available as accessories from
http://www.hudora.de/service.
DISPOSaL aDvICE
At the end of the product's life, please dispose of it at an appropriate collection point in
your area. Local waste management companies will be able to answer your questions
on this.
SERvICE
We make every effort to deliver faultless products. If faults do arise however, we put just
as much effort into rectifying them. Therefore, you can find numerous information on the
product, replacement parts, solutions to problems and lost assembly manuals at http://
www.hudora.de/service.
4/8