Technical Specifications; Safety Instructions - Hudora 14936 Instrucciones De Montaje Y De Uso

INSTRUCTIONS ON aSSEMBLY aND USE
EN
CONGRaTULaTIONS ON PURCHaSING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral com-
ponent of the product. Therefore, please store them and the packaging carefully
in case questions arise in the future. Please always include these instructions
when handing on the product to a third party. This product must be assembled
by an adult. This product is not designed for industrial use. The use of the pro-
duct requires certain capabilities and skills. Always adjust according to the age
of the user and use for the purpose it has been designed for.

TECHNICaL SPECIfICaTIONS

Item: Scooter HUDORA Street-Dragon 120
Item number: 14936
Dimensions: approx. 67 cm in length, deck approx. 29 x 9 cm
Weight: about 2.8 kg
Maximum user weight: 50 kg
Purpose: Toy scooter for playing and mechanically driven dri-
ving, according to these instructions.
If you have assembly problems or would like further information on the product,
we have all you need and more at http://www.hudora.de/.
CONTENTS
1 x scooter
1 x usage instructions
Other parts which may be included with the delivery in some circumstances are
not required.

SafETY INSTRUCTIONS

• Wear suitable protective clothing for your own safety. Wear personal protec-
tive equipment. This includes at least: hand/wrist guards, knee pads, head
protection and elbow pads. Never use the scooter without shoes!
• The scooter is only intended for use by one person.
• Always be considerate of others.
• Only use the scooter on surfaces that are suitable for it, i.e. those which
are flat, clean, dry, and use the scooter where possible away from other
road users. Avoid sloping ground. The brakes may become hot if the scooter
has been used for a while! Your footwear could be damaged! The brakes
shouldn't be touched until they have cooled down.
• Before you begin – Ensure that all fasteners and locking parts are intact and
tight, e.g. the folding mechanism and the height setting of the handlebar.
The functions of self-securing screw threads can be impaired after repeated
loosening and tightening of the connecting elements. Check especially for
the correct alignment and fastening of the steering set-up.
• Do not use the scooter at twilight, at night or in poor visibility. Do not use it
on roads or thoroughfares or on slopes or hills. Avoid being in the proximity
of stairs and open water.
• The scooter is not suitable for jumps.
• Children should only use the product when they are under adult supervision.
• Prior to using the scooter, please inform yourself about restricting applicable
traffic regulations for the intended area of application. It is intended for use
on footpaths.
• The use of the product requires specific skills and knowledge to be able to
avoid injuries due to crashes and collisions.
• Warning! Protective equipment should be worn. Not to be used in traffic. 50
kg max.
• Warning! Not suitable for children under 36 month because of the risk of
swallowing small parts. Choking Hazard!
• Batteries required: 4 x AA (Not supplied).
• Warning! Never try to charge non-rechargeable batteries. If attempts are
made to charge this type of battery, they may not only run out but also explo-
de, which may lead to destruction, the risk of fire and not least to injuries.
• Rechargeable batteries must be removed from the scooter before charging.
• Make sure that rechargeable batteries are only charged under adult supervi-
sion.
All images are examples of the design.
• Use only the batteries specified in these instructions.
• Please remove empty batteries from the scooter and dispose of them in an
environmentally appropriate manner.
• Do not combine used and unused batteries in the scooter.
• Remove the batteries when the scooter is not in use.
INSTRUCTIONS ON aSSEMBLY
You do not need any tools for this assembly. The scooter is delivered to you in its
transport form (folded)! (Picture 1)
PLEASE PROCEED AS FOLLOwS TO GET THE SCOOTER READY FOR USE
• Open the quick release fastener at the front end of the deck by pulling the
end of the fastener towards itself and turning it in an anti-clockwise direction
until it is released (white arrow). Now pull the black lever upwards in order to
release the transport lock (black arrow). (Picture 2)
• Push the steering rod forward until you can hear it click into place at an
approx. 90° angle. (Picture 3) Tighten the quick release fastener again by
turning it in a clockwise direction while tightening the fastener with the small
wheels on the opposite side. Tilt the quick release fastener once again so that
it is fitting securely against the scooter.
• Insert the handlebar grips into the T piece of the handlebar stem. Use your
thumbs to press down both locking buttons until the grips can be easily pu-
shed into the T piece. Turn the handlebar grips until the locking buttons are
positioned in the two openings intended for them and you hear them click into
place. Check that both handlebar grips are fitted correctly by pulling them
outwards. If they do not move, they have been assembled in accordance with
the instructions. (Picture 4)
• To adjust the height of the handlebars, release the quick release fastener on
the handlebars by pushing the lever of the quick release fastener away from
the handlebars until the lever is parallel to the handlebar grip.
• Pull the handlebar rod out of the handlebar stem until it is at the required
height and the relevant button has snapped into place. (Picture 5) The maxi-
mum height and cannot be exceeded due to the integrated lock. If the handle-
bar is not fitting tightly enough at the required height, open the quick release
fastener again and twist the screw opposite to it further into the thread so
that the fastening bracket fits more tightly to the handlebar rod. Repeat this
process until the handlebar rod can be aligned securely. (Picture 6)
• Now close the quick release fastener by pushing the lever down to the hand-
lebar stem.
• Always check that all parts are fitting tightly before use, particularly the fol-
ding mechanism, the handlebar lock and the wheels.
TO GET THE SCOOTER READY FOR TRANSPORT AGAIN,
PLEASE CARRY OUT THE FOLLOwING ACTIONS
• Release the quick release fastener by pushing the lever of the quick release
fastener away from the handlebar stem.
• Push the handlebar rod as far as it will go into the handlebar stem.
• Close the quick release fastener by pushing the lever of the quick release
fastener down to the handlebar stem.
• Use your thumbs to press both locking buttons in the handlebar grips and pull
the handlebar grips outwards until they come out completely from the T piece.
(Picture 4)
• Push the handlebar grips down until they are parallel with the handlebar shaft
and the handlebar holders lock in place.
• Open the quick release fastener at the front end of the deck again in order
to release the assembly lock. Then pull the black lever upwards in order to
release the transport lock. (Picture 2)
• Fold up the scooter by moving the handlebar rod towards the back wheel until
you hear the transport lock click into place.
5/16