Belkin Wireless G Plus Manual Del Usuario página 32

Alternate Setup Method Alternate Setup Method
Setting your Internet Service Provider (ISP) Connection Type
to Dynamic IP
A dynamic connection type is the most common connection type
used with cable modems. Setting the connection type to "dynamic" in
many cases is enough to complete the connection to your ISP. Some
dynamic connection types may require a host name. You can enter
your host name in the space provided if you were assigned one. Your
host name is assigned by your ISP. Some dynamic connections may
require that you clone the MAC address of the PC that was originally
connected to the modem.
(1)
(2)
1. Host Name
This space is provided to enter a host name that needs to be
visible to your ISP. Enter your host name here and click "Apply
(3)
Changes"
are not sure, leave this blank.
2. Change WAN MAC Address
If your ISP requires a specific MAC address to connect to the
service, you can enter a specific MAC address or clone the
current computer's MAC address through this link.
. If your ISP did not assign you a host name, or you
30 30
(3)