Wep Setup - Belkin Wireless G Plus Manual Del Usuario

Using the Web-Based Advanced User Interface

WEP Setup

64-Bit WEP Encryption
1.
Select "64-bit WEP" from the drop-down menu.
2.
After selecting your WEP encryption mode, you can enter your
key by typing in the hex key manually, or you can type in a
passphrase in the "Passphrase" field and click "Generate" to
create a key.
A hex (hexadecimal) key is a combination of numbers and letters
from A–F and 0–9. For 64-bit WEP, you need to enter 10 hex keys.
For instance: AF 0F 4B C3 D4 = 64-bit WEP key
3.
Click "Apply Changes" to finish. Encryption in the Router is now
set. Each of your computers on your wireless network will now
need to be configured with the same security settings.
WARNING:
If you are configuring the Wireless G Plus Router from a
computer with a wireless client, you will need to ensure that security
is turned ON for this wireless client. If this is not done, your client will
lose its wireless connection.
53 53
1
2
3
4
5
6
7
8
9
10