Bergstrom Bycool blue line FLAT Instrucciones De Montaje página 13

FLAT
Place the supplied template on the top section
1
in the running direction of the vehicle, with the
boreholes at the sides.
Mark the cut and the (4) boreholes, and bore at
2
Ø10.
A- Position the template on the (4) boreholes
inside the cabin, in order to mark the cut on
the upholstering and then use the cutter, thus
avoiding breakage and/or tearing.
B- From the outside cut at the previously made
marking.
2
Attach the assembly seal around the cut and
3
seal the inside with silicone.
Position the evaporation unit on the top
4
section.
1
Template
SENTIDO
DE LA
MARCHA
b
13
Running
direction
b
GAP
silicone
ES
EN
®
2
SENTIDO
DE LA
MARCHA
3
4