Bergstrom Bycool blue line FLAT Instrucciones De Montaje página 14

FLAT
EN ES
On the inside of the cabin secure the unit with
5
(4) 8/125x35 screws, (4) Ø8 wide-rimmed flat
washers.
Tighten the screws until the seal is pressed
down between 3 and 5 mm. - torque 4÷5
N.m - (SEE DETAILS)-.
Screw 8/125x35 Ø 8
Ø 8 Wide-rimmed flat washers
5
Joint
Cabin roof
5
Screw 8/125x35 Ø 8
Ø 8 Wide-rimmed flat washers
Screw 8/125x35
Details
3 - 5mm.
Cabine roof
Apretar tornillos hasta el apriete
Fasten screw until EPDM gasket is
de la junta de goma entre 3 y 5 mm.
compressed between 3 and 5 mm.
(4) M6 protection caps
14
Junta de goma
EPDM gasket
Bycool base
Joint
Wide wing flat washer Ø 8
Nut M6
®