Pentair Intellibrite 5G Guia De Instalacion página 6

Operating IntelliBrite Pool LED Lights - Using a Wall Switch
I
ntelliBrite 5g pool LED lights can be controlled using a standard wall-mount light switch. Multiple
IntelliBrite LED lights can be connected via a junction box to a single switch so that all lights can be
switched on and off together. IntelliBrite 5g lights are controlled by cycling AC power from a standard
wall switch. By turning the switch on and off a specific number of times, the light activates one of the
seven light show modes, fixed colors, and enables the "Hold" and "Recall" feature.
Selecting a light show mode or fixed color
Switch power on to the light. A white light will momentarily illuminate, followed by the previously
selected color. To select a color show mode (1-7) or fixed color (8-12), turn the wall switch off/on a
specific number of times. Each number (1-12) shown below corresponds to the number of times to
power-cycle the switch to activate a color light show or fixed color. For details about saving color
effects while in "show" modes, see "Hold" and "Recall" feature.
1. SAm Mode: Cycles through white, magenta, blue and green colors (emulates the Pentair
SAm® light).
2. Party Mode: Rapid color changing building energy and excitement.
3. Romance Mode: Slow color transitions creating a mesmerizing and calming effect.
4. Caribbean Mode: Transitions between a variety of blues and greens.
5. American Mode: Patriotic red, white and blue transition.
6. California Sunset Mode: Dramatic transitions of orange, red and magenta tones.
7. Royal Mode: Richer, deeper color tones.
8. Blue: Fixed color.
9. Green: Fixed color.
10. Red: Fixed color.
11. White: Fixed color.
12. Magenta: Fixed color.
13. Hold: Save the current color effect during a color light show.
14. Recall: Activate the last saved color effect.
Example: To select California Sunset Mode; turn the switch off and on six successive times.
During the off/on switching process, no illumination will occur, then a white light will momentarily
illuminate.
During the off/on switching process, before the selected color is displayed, no
illumination will occur. This operating mode is normal during the switching process.
During this period the pool and spa will be dark and precautions should be taken to
avoid unforeseen accidents. Failure to observe this warning may result in serious injury
or death to pool and spa users.
6