Saving A Color Mode Or Fixed Color; Hold And Recall Feature - Pentair Intellibrite 5G Guia De Instalacion

Saving a color mode or fixed color

When power is switched off to the IntelliBrite lights, the last color show mode or fixed color will be
saved. The next time the light is powered on, the previously saved color show mode or fixed color
will be displayed. For example, while in "Party Mode" switch the light off. Wait more than 10 seconds,
switch the light back on to resume "Party Mode".

Hold and Recall feature

Hold:
Use the Hold feature (power-cycle 13 times) to capture and save a color effect while
displaying one of the light show modes. It's easier to capture custom color effects from one of
the slower light show modes, such as "Romance Mode" (#3).
Recall
: Use the Recall feature to activate the last saved color effect (using the Hold feature)
while in color show mode or fixed colors. To recall the color effect, power-cycle 14 times, and
after five seconds the last saved color effect will be displayed.
Powering on the light
When the IntelliBrite LED light is powered on, a momentarily white light will illuminate, followed by the
previously selected color.
Note: If power to the light is off for more than five seconds, the last color show mode or fixed
color that was saved will be displayed.
7