Pentair INTELLIBRITE CONTROLLER Guia De Instalacion página 10

Installing the IntelliBrite
The IntelliBrite Controller mounts onto a specific outlet box (19.5 cubic inches
minimum). After wiring the IntelliBrite Controller, check all wiring connections
before mounting the controller into the outlet box.
To install the IntelliBrite Controller:
1. Neatly arrange the wires in the back of the outlet box.
2. Align the Controller with the screw holes of the outlet box. Secure the Con-
troller to the outlet box with the two (2) retaining screws.
3. Close the front door of the Controller.
Retaining
Screw
Retaining
Screw
Controller in the Outlet box
®
Arrange wires
neatly behind
Controller
L
N
10
Screw hole (X6)
Red
Black
White/Blue
Transformer
Retaining Screw
Retaining Screw
PRINTED ON: 7/29/2009, 600054_ctlg pics.SLDASM
IntelliBrite
IntelliBrite