2.2 The Photomizer SE
software
If you need help in the
„Photomizer SE" programme
click „?" and then „Open help".
If you need further assistance
please visit the maker's home
page at www.photomizer.net
2.3 Record and save video
from the micro-eyepiece
to a PC
1. Start the Webcam VideoCap
software.
2. If you have connected more
than one device, you will be
asked to select the desired
device. Click on „Component"
and choose „USB2.0
WebCAM". If only one device is
connected, this step is omitted.
16
3. Now you should be able to
see the image from the camera
on your monitor. Focus the
image on the microscope.
4. Click on „Access".
5. Click on „Start Access" to
start recording video.
5. To stop recording, click
„Stop Access".
6. To view the video that you
have recorded, click on „File"
and select „Open Folder for
Data Access".
7. Select your recorded video
in this folder, for example
„Clip00xx".
NOTES on cleaning
Separate the device from the
power supply (USB) before
cleaning.
Only use a dry cloth to clean
the exterior of the device. Do
not use any cleaning fluid to
avoid damaging the electronics.
Protect the device from dust
and moisture! Store it in the
supplied bag or transportati-
on packaging. The batteries
should be removed from the
unit if it has not been used for
a long time.