Automatic Time Setting; Manual Time Setting - Bresser NATIONAL GEOGRAPHIC 9070300 Manual De Instrucciones

9 Automatic time setting

After the power supply was established, the clock will auto-
matically search for the radio signal. This will take approxim-
ately 3 to 8 minutes to finish this process.
If the radio signal is received correctly, the date and time
will be set automatically and the radio control signal icon
turns on.
If the clock fails to receive the time signal, go ahead with the
following steps:
1.
2.
Read the detailed manual for more information about
manual time and alarm time settings (see download inform-
ation on page 2).

10 Manual time setting

1.
2.
3.
4.
5.
6.
32 / 56
Press and hold the DOWN button for approx. 2
seconds to re-initialize radio signal reception.
Is the device still not receiving the signal, the time must
be set manually.
Press and hold SET button for approx. 2 seconds to
change to time setting mode.
Digits to be set are flashing.
Press UP or DOWN button to change the value.
Press SET button to confirm and continue to the next
setting.
Settings order: Year > Month > Day > Time zone >
12/24-hour mode > Hours > Minutes
Finally press the SET button to save the settings and
exit the setting mode.