Technical Details - Multimetrix CM 605 Manual De Instrucciones

9.1 GENERAL
Value measurements
Display
Polarity indication
Ranges
Additional selectable
functions
Battery indication
Sampling frequency
Analog output
Use
Storage
Battery
Autonomy (when
measuring Volts DC)
Dimensions and
weight
Pollution level
CEI
Delivered with the
instrument

9.2 TECHNICAL DETAILS

Reference conditions: 18°C - 28°C; RH < 80%, no condensation. Norm:
NF EN 61010-1, 300 V, CAT III.
Accuracy specifications defined as 5% and 100 % on each range.
See table on Page 34.
9. CHARACTERISTICS
DC and AC voltages, AC and DC
current, resistance, continuity test.
4 digits (9 999 points)
" – " sign.
Automatic range selection.
Automatic shutdown (active or not).
Display of capacity being exceeded
Maximum measurement (Peak).
Measurement storage (Data Hold).
Zero mode, relative measurements.
Low charge battery symbol
Approx. 2 times per second.
For ACA and DCA ranges.
10 mV/A (20 kHz ±3 dB).
Accuracy : ±4.5% reading +0.5 mV.
Output impedance: approx 3 kΩ.
Overload protection: 600 V RMS.
0 to 40°C (32°F - 122°F). RH < 80%,
no condensation.
-10°C to 60°C (14 – 140°F); RH <
70%, no condensation and with the
battery removed.
2 1.5V AAA type batteries.
45 hours with alkaline battery.
202 x 70 x 34 mm / 7.95 x 2.76 x 1.33
inch. (L x l x H). 180 g (with batteries)
2
CEI 61010, 300 V, CAT III
2 1.5V AAA type batteries.
Two power cables
One set of operating instructions.
A carrying case.
14
.