Maintenance; Environment; Eu Declaration Of Conformity - Festool HK 132 E Manual De Instrucciones

For this purpose, the curve-cutting attachment
swivels by up to 45°.
Set the saw to the minimal cutting depth.
Remove the saw blade [3-3] by following the in-
structions in Section 7.7 (Replacing the saw blade).
Unscrew the following components:
Plate [5-1] covering the blade guard
Guard [5-2] covering the pendulum mount
Dust extraction connection [5-3]
Riving knife [5-4]
Ensure the curve-cutting head [7-3] is clean and
fi tted according to the illustration and screw it
tight. Ensure that the mounting fl ange [7-1] and
the clamping fl ange [7-2] are in the correct posi-
tion. The holes in the curve-cutting head [7-3] must
fi t onto the follow-up pins on the mounting fl ange
[7-1]. Insert the pin [7-4] into the hole on the curve-
cutting head to secure it.
Screw the cover guard [7-5] onto the pendulum
mount [7-6].
Screw the cover guard [7-7] onto the blade guard
[7-8].
Select the depth to be milled as described in Section
7.2 (Cutting Depth Adjustment) and the angle to be
milled as described in Section 7.3 (Cutting Angle
Adjustment).
You can check the curve depth against the angle to
be milled on the table on the blade guard.

10 Maintenance

WARNING
Risk of accident, electric shock
 Always pull the plug out of the socket before
performing any type of work on the machine.
 All maintenance and repair work which re-
quires the motor housing to be opened, must
only be carried out by an authorised service
workshop.
Customer service and repair. Only through
manufacturer or service workshops:
Please fi nd the nearest address at: www.
festool.com/Service
Use only original Festool spare parts! Or-
EKAT
4
der No. at: www.festool.com/Service
5
3
2
1
- The unit should be stored in a dry place where it
is protected against freezing.
- With each changing of the saw blade, re move de-
posited saw dust from the inside of the protective
guard.
- The ventilation slots on the motor casing should
be cleaned out from timxe to time.
After an operating period of approx. 200 hours, the
following maintenance work must be performed:
- Check the motor brushes and replace if neces-
sary. Clean the motor housing.
- Renew the grease filling of the gear box.

11 Environment

Do not throw the power tool in your household
waste! Dispose of the machine, accessories and
packaging at an environmentally-responsible re-
cycling centre! Observe the valid national regula-
tions.
EU only: European Directive 2002/96/EC stipulate
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
Information on REACh:
www.festool.com/reach

12 EU Declaration of Conformity

Hand Circular Saw
HK 132 E
Year of CE mark: 2013
We declare under sole responsibility that this
product complies with the following norms or
normative documents:
2006/42/EC, 2004/108/EC, 2011/65/EU, EN 55 014-
1, EN 55 014-2, EN 60 745-1, EN 60 745-2-5, EN
61 000-3-2, EN 61 000-3-3.
Festool Group GmbH & Co. KG
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Martin Zimmer
Head of Research, Development and Technical
Documentation
2013-04-15
22
Serial no.
10011289