Bread Recipes - Princess 151934 Instrucciones De Uso

- Be careful when the breadmaker is hot, because it can cause serious burns.
- Do not use the breadmaker with wet hands.
- Do not use any metal objects in the bread pan.
- Only use parts that are recommended by the manufacturer.
- Connect the breadmaker to a 230 Volt alternating current.
- We recommend that you stop using the breadmaker if it shows any defects or if the lead is damaged.
Have it repaired or replaced by our service department.
- Do not cover the breadmaker with a towel or other object.
- Never place more than the recommended amount of ingredients in the breadmaker because the dough
will run over the bread pan, with all the consequences.
- Each recipe lists fresh yeast and dry yeast; you can choose one or the other.
- Make sure that the yeast does not come in contact with the salt or liquid.
10 IMPORTANT STEPS FOR BAKING SUCCESS
1. Place the baking pan with the kneading hook in the machine.
2. Place the ingredients in the baking pan in the following order:
• Flour/meal
• Water/ milk
• Butter/margarine
• Sugar
• Salt
Yeast
3. Close the lid and put the plug in the outlet. Now 0:00 will appear on the display.
4. Press the selector and choose the desired colour of the crust.
5. If you wish to use the timer function, you can set it now.
6. Press the start button.
7. After the 1st beep the ingredients can be added.
8. The second beep indicates that the baking process is finished.
9. Remove the baking pan from the breadmaker and after one minute remove the bread from the pan
and allow to cool on a rack. BE CAREFUL! The bread pan and the bread are hot. Use oven gloves.
10. Switch off the appliance and remove the plug from the outlet.
H:HH
H:HH appears on the display when the temperature in the breadmaker is still too high for the new pro-
gram. You will also hear a beep.
The easiest way to slice freshly baked bread is with an electric knife from Princess.

BREAD RECIPES:

U.K. WIRING INSTRUCTIONS
The wires in the mains lead are coloured in accordance with the following code:
BLUE = NEUTRAL, BROWN = LIVE, GREEN-YELLOW = EARTH
As the colours of the wire in the mains lead of this appliance may not correspond with the colour
markings identifying the terminals on your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the
letter N or coloured black.
The wire which is coloured BROWN must be connected to the terminal which is marked with the
letter L or coloured red.
The wire which is coloured GREEN-YELLOW must be connected to the earth terminal which is marked
with the letter E or
With this appliance, if a 13 amp plug is used a 13 amp fuse should be fitted. If any other type of plug is
used a 15 amp fuse must be fitted either in the plug or at the distribution board.
or coloured green and yellow.
15