Assembly Instruction - Denver ORUS Instrucciones De Uso

1. Rim
2. Tyre & tubes
3. Spokes
4. Disc brake
5. Suspension fork
6. Front hub
7. Handlebar & stem
8. Brake lever
9. Grip shifter
10. Frame
11. Seat clamp
12. Seat post
13. Saddle
14. Crank set
15. Pedal

Assembly Instruction

THIS PRODUCT MUST BE ASSEMBLED BY A QUALIFIED TECHNICIAN AND SHOULD NOT
BE ATTEMPTED BY ANY ONE WHO IS NOT TRAINED
Ⅲ. MANUAL FOR THE ELECTRIC PARTS OF THE E-BIKE
The rider must pedal forward to obtain any assistance from the motor. This is an important safety feature. This
electric pedal assistance bikes will provide assistance up to 25 Km/h, after that the motor will cut out. You
may go faster but must do so under your own effort without the electric assistance.
To start the e-bike turn on the main switch on the side of the battery, the LCD on the handlebar panel will light
up. The motor will not work until you pedal a full revolution of the chain wheel. This feature protects the
motor and controller from damage and extends the service life of the electric components.
16. Chain
17. Kickstand
18. Rear derailleur
19. Rear motor hub
20. Freewheel
21. Front derailleur
22. Grip
23. Battery
24. Controller
25. Battery lock
26. Motor cable
27. Speed sensor
28. Power showing
29. Charging port
30. Display.
(Fig.1.1)
4/17