Snapper SST-BC Manual Del Propietário página 12

Im
SNAPPER hereby warrants to the original retail purchaser ALl_ NEW products of its own manufacture to be free from defect in
material and workmanship, for a period of two (2) years form the date of the original purchase, subject to the following exceptions.
Products Consumer Use Commercial/Rental Use I
Hand Held String Trimmers 2 Years 90 Days
I
No warranty is extended to any equipment, which has been misused, neglected, or damaged by accident.
Snapper shall not be responsible for damage in transit or handling by any common carrier. Under no
circumstances, within or without the warranty period, willthe company be liable for damage for loss, or damage
resulting from delay, or any consequential damage Including but not limited to any cost or expense of providing
substitute equipment or service during periods of malfunction or non-use. Snapper will repair or replace, free of
charge any part or parts of the units found upon examination by any FactoryAuthorized Dealer or by the factory
to be defective in materials and or workmanship for the term of the warranty.
The consumer is responsible for: (1) normal maintenance such as greasing, gear case lubrication, minor
adjustment and (2) transportation of any Snapper product to and from the place warranty work is performed.
Snapper warranty WILL NOT APPLY to any products repaired or altered by anyone other than an Authorized
Service Distributor or Authorized Service Dealer.
Snapper reserves the right to incorporate any changes in design into its products without obligation to make
changes on units previously manufactured.
For engine warranty, please refer to the Brigga & Stratton manual.
Mass without fuel, cutting attachment, guards: J Handle Bar Unit .... 6.264 kg
Bike Handle Bar Unit.. 6.292 kg
Fuel Tank Volume: .......................................... 296 cm 3
Max engine performance; ..................................... 0.746 kW
Max rotational frequency of the spindle: ......................... 6467 RPM
Engine speed at maximum spindle frequency: .................... 8600 RPM
Engine speed at idle: ........................................ 3600 RPM
Fuel consumption: .......................................... 0.399 kg/h
Specific fuel consumption: .................................... 542 g/kWh
Vibration levels for idling and racing:
Wide Open Throttle "racing" Idle
Left Hand = 3.20 m/s2 Left Hand = 2.14 m/s 2
Right Hand = 2.76 m/s2 Right Hand = 2.28 m/s 2
Sound pressure levels: ...................... Operator Ear Lp dB(A) _ 91.44
10