Using The Archos Interface - Archos DVR STATION Manual De Usuario

CONFIGURING THE "TV OUT" PARAMETERS
The wizard will help you confi gure the following settings. If you ever need to change these settings again, you can
always select "
Tools
On Android™, select
"TV Connection"
select the type of video output ("
-
you have connected the DVR Station to your TV.
If you use the supplied cables, select "RGB" (for Europe) or "S-Video" (for US). If you use other cables, then select the correspond-
ing video output type.
"Resolution" / "TV Standard" / "TV Format"
1
select the resolution that best adapts to your TV: "
-
", or "
(720x576)
* This parameter only appears if you choose the "HDMI" TV connection mode.
choose between the "
-
your country's television system).**
" ", "
4:3 16:9
-
** These parameters do not appear if you choose the "HDMI" TV connection mode.
"Audio Output"
defi nes whether the audio signal is sent out via the "
-
ing on how you have connected the DVR Station to your TV.
See chapter 3 ( TV Recording: Hardware Setup) to learn how to connect a tuner to the DVR Station in order to schedule
a TV recording (manually or via the TV Program Guide).

2.3. USING THE ARCHOS INTERFACE

Here are a few tips to use your ARCHOS while it is connected to the DVR Station.
SWITCHING THE DISPLAY BETWEEN THE ARCHOS SCREEN AND THE TV
To switch the display of the ARCHOS between the built-in LCD screen and the TV, press the
remote control.
" > " " > " ".
Settings TV out
> "
Menu Settings
Composite
".*
720p 16/9 (1280x720)
" and "
NTSC (USA) PAL (Europe)
", or " " - the format used by your television set to display images.**
Wide screen
" > " ".
TV out
", " ", " ", "
S-Video Component RGB
", "
VGA 4/3 (640x480) 480p 16/9 (720x480)
" systems (select the one that is compatible with
", "
Analog Line-Out HDMI
USER MANUAL - version 1
" or " "), based on how
HDMI
" "
576p 16/9
" or " " interface depend-
SPDIF
button on the
TV
7