Building Instructions - Multiplex microJET Instrucciones De Montaje

microJET
microJET
1. Examine your kit carefully!
MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely
hope that you are happy with the contents of your kit. However, we would ask you to check all the parts before you
start construction, as we cannot exchange components which you have already worked on. If you find any
part is not acceptable for any reason, we will readily correct or exchange it. Just send the component to our Model
Department. Please be sure to include a brief description of the fault.
We are constantly working on improving our models, and for this reason we must reserve the right to change the
kit contents in terms of shape or dimensions of parts, technology, materials and fittings, without prior notification.
Please understand that we cannot entertain claims against us if the kit contents do not agree in every respect with
the instructions and the illustrations.
Caution!
Radio-controlled models, and especially model aircraft, are by no means playthings. Building and
operating them safely requires a certain level of technical competence and manual skill, together with
discipline and a responsible attitude at the flying field. Errors and carelessness in building and flying
the model can result in serious personal injury and damage to property. Since we, as manufacturers,
have no control over the construction, maintenance and operation of our products, we are obliged to
take this opportunity to point out these hazards, and to emphasise your personal responsibility.
Additional items required:
RC system components:
MULTIPLEX PiCO 5/6 receiver
MULTIPLEX Nano-S servo (2 reqd.)
PiCO-Control 400 round UNI
Flight battery:
MULTIPLEX 7/500 AR - HS flight battery
Battery charger:
PiCO AUTO-charger for rapid-charging transmitter and flight packs
Adhesive:
MULTIPLEX "Medium Zacki"
MULTIPLEX "Zacki Activator"
Other types of cyano (cyano-acrylate adhesive) can be used. Do not use styrofoam cyano.
Tools:
Scissors, combination pliers, balsa knife, screwdriver, 4-5 mm Ø bradawl, small round file
Specification:
Wingspan
Fuselage length
All-up weight
All-up weight
Wing area
Wing loading
RC functions
Separate the illustration pages from the centre of this booklet.
8

Building instructions

standard - 400 motor / 7 cells
480 motor / 8 cells
Function
35 MHz
40 MHz
Elevator / aileron
Speed controller
approx.
approx.
approx.
min. approx.
Aileron, elevator and motor
Order No. 5 5920
Order No. 5 5921
Order No. 6 5120
Order No. 7 2292
Order No. 15 5648
Order No. 9 2526
Order No. 59 2720
Order No. 59 2824
580 mm
545 mm
450 g
530 g
10.2 dm²
45 g/ dm²