Waeco SinePower MSI912 Instrucciones De Montaje página 49

SinePower
The inverter operates in energy-saving mode as long as the required power
is below the set level. If the required power exceeds the set level, the inverter
works in normal mode.
The values to be set on your inverter can be found in the following table:
Energy-saving mode
MSI900 MSI1300
Off
– <60 W
<70 W <130 W
<200 W <210 W
Defining settings
Using the S8 dip switch you can define whether the parameter of the setting
should be made using the connection for the remote control or the dip switch-
es.
Parameter
Remote control connec-
tion
Dip switch
10.4 Connecting the remote control (accessory)
NOTE
I
The RS232 port can be configured. Contact customer services for
further information (telephone numbers on the back of the instruc-
tion manual).
➤ Set the main switch(fig. 6 1, page 4 and fig. 7 1, page 5) to "RE-
MOTE".
➤ Connect the remote control (accessory) to the RS232 "Remote Port"
(fig. 5 2, page 4).
EN
MSI1800
Off Off
<110 W
<180 W
<220 W
Using the inverter
Dip switch
S4 S5
Off Off
On Off
On On
On On
Dip switch
S8
Off
On
S6
Off
Off
Off
On
49