Tabla De Contenido; Symbols; Safety Rules; General Safety Rules - Festool EHL 65 E Manual De Instrucciones

Table of contents
Symbols .............................................................3
Safety rules ......................................................3
General safety rules .......................................... 3
Planer Safety rules ............................................ 4
Technical data ...................................................5
Intended use ......................................................5
Power supply and start-up ................................5
Electronics ........................................................6
Chip thickness adjustment ................................6
Changing cutters ...............................................6
Dust extraction ..................................................7
Putting the planer down ....................................7
Fitting the guides ..............................................8
Rebating depth guide (488543).......................... 8
Parallel guide .................................................... 8
Working with the planer ....................................8
Chamfering ........................................................ 8
Accessories, tools .............................................9
Servicing and maintenance ..............................9
Warranty .........................................................10

General safety rules

Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fi re and/
or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1 WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered
and dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of fl ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
V Volts
A Amperes
Hz Hertz
~ Alternating current
n No load speed
0
Class II Construction
rpm Revolutions or reciprocation per minute
Ø Diameter
Warning of general danger
Read the Operating Instructions/Notes!

Safety rules

2 ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodifi ed plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
3

Symbols