Product Specific Safety Notes - Mettler Toledo SLF6 Serie Manual De Usuario

2.3 Product Specific Safety Notes

Your load cell meets the state of the art technology and complies with all recognized safety rules, however,
certain hazards could arise. Do not open the load cell: It does not contain any parts which can be
maintained, repaired or replaced by the user. If you ever have problems with your load cell, contact your
authorized METTLER TOLEDO dealer or service representative.
Observe Instructions
Always operate and use your load cell only in accordance with the instructions contained in the product
documentation. The instructions for setting up your load cell must be strictly observed.
If the load cell is not used according to the product manuals, protection of the load cell may be
impaired and METTLER TOLEDO assumes no liability.
Staff Safety
In order to use the load cell, you must have read and understood the operating instructions. Keep the
operating instructions for further reference.
Use only METTLER TOLEDO accessories and peripheral devices, these items are designed to work optimally
with your load cell.
Safety Notes
SLF6-Series
CAUTION
The load cell (standard and Category 3) may only be connected to DC power sources
•
that meet the 12 to 24 volt nominal range (10 to 29 V DC) at all times.
The APS768x power supply used for Category 2 may only be supplied with 120 V /
•
230 V +10 % / –15 %; 50 Hz; 160 mA.
The power supply must be approved by the respective national test center of the country
•
in which the load cell will be used.
Safety Information 5