Calldur - Call Duration; Callerid - Reports Caller Id Information; Cgroup - Compressor Group Select; Chairo - Chairman Override Mode - ClearOne CONVERGE PRO 880 Manual De Instalación Y Funcionamiento

calldUR – Call Duration
This command returns current call duration. if no call is active, this command returns 0. At the time of call
termination, this command will automatically be sent out to report call duration. This command is read only.
Command Form: DEVICE calldUR <Channel> <duration>
argument Type
Channel Channel
Group Group
reserved
duration String
calleRid – Reports Caller ID Information
This command reports Caller identification information. This command is reportable only. it cannot be queried
or set.
Command Form: DEVICE calleRid <Channel> <number> <Argument>
argument Type
Channel Channel
Group Group
reserved unsigned integer
number String
label String
cGRoUp – Compressor Group Select
This command selects/reports the setting of the compressor group.
Command Form: DEVICE cGRoUp <Channel> [Value]
argument Type
Channel Channel
Group Group
Value unsigned integer
chaiRo – Chairman Override Mode
This command selects/reports the setting of chairman override.
Command Form: DEVICE chaiRo <Channel> [Value]
argument Type
Channel Channel
Group Group
Value unsigned integer
214 Technical Services: 800-283-5936
size values
1 See Groups and channels
1 17 (r)
2 0
8 String of format Hr:mn:SS
size values
1 See Groups and channels
1 17 (r)
2 0
16 1 – 16 chars
16 1 – 16 chars
size values
1 See Groups and channels
1 5 (p)
2 0 = none
1 – 4
(null to query in text)
size values
1 See Groups and channels
1 3 (m)
2 0 = off
1 = on
2 = Toggle
(null to query in text)
Units
Units
Units
Compressor
Group
Units