Devicetype - Sets The Type Of A Connected Device; Dfltm - Default Meter; Dial - Dtmf Dialing; Did - Device Id - ClearOne CONVERGE PRO 880 Manual De Instalación Y Funcionamiento

deviceType – Sets the Type of a Connected Device
This command enables / disables or reports the current type of device connected to an input or output.
Command Form: DEVICE deviceType <Channel> <Group> [Value]
argument Type
Channel Channel
Group Group
Value unsigned integer
dFlTm – Default Meter
This command selects/reports the setting of the default meter on the front panel.
Command Form: DEVICE dFlTm [Channel Group position]
argument Type
Channel Channel
Group Group
position meter Type
dial – DTMF Dialing
This command dials a dTmF sequence or reports back the last sequence dialed.
Command Form: DEVICE dial <Channel> [number]
argument Type
Channel Channel
Group Group
reserved
number String
did – Device ID
This command reports the device id. This command is read only except through the front panel.
Command Form: DEVICE did [Value]
argument Type
Value unsigned integer
dspveR – DSP Version
This command reports the version of the dSp code in the unit. This command is read only.
Command Form: DEVICE dspveR <Value> [Time/date]
argument Type
Value unsigned integer
Time / date String
218 Technical Services: 800-283-5936
size values
1 See Groups and channels
1 1, 2, 3, 7 (i, o, m, l)
2 (null to query in text)
size values
1 See Groups and channels
(null to query in text)
1 1, 2, 3, 7, 16, 17 (i, o, m, l, T, r)
2 1 – 4, as applicable for group
See meter Type definitions
size values
1 See Groups and channels
1 17 (r)
2 0
40 1 – 40 Chars of '0' – '9', 'A' – 'd', '*', '#', ','
(null to query last number dialed in text)
size values
4 See Type and device ids
(null sent in text, Value returned)
size values
4 0 for Host
1 – 8 for Satellite
9 for Telco
16 (null to query in text)
Units
Units
Units
Units
Units