Gain - Gain Adjustment; Gate - Gate Status; Ghold - Gate Hold Time Adjust; Gmode - Gating Mode - ClearOne CONVERGE PRO 880 Manual De Instalación Y Funcionamiento

Gain – Gain Adjustment
This command changes or reports back the gain for a channel.
Command Form: DEVICE Gain <Channel> <Group> [Value] [Absol/rel]
argument Type size
Channel Channel 1
Group Group 1
Value Signed 2
Float
Absol / rel 0
noTe: Values indicate valid range for entry values only. Actual internal range of the gain stage is
from –65 to 20. Absolute values will be limited to the internal gain range.
GaTe – Gate Status
This command reports the gate status of mics. This command is read only.
Command Form: DEVICE GaTe [Value]
argument Type
Value Hexadecimal
Ghold – Gate Hold Time Adjust
This command selects/reports the setting of hold time.
Command Form: DEVICE Ghold <Channel> [Value]
argument Type
Channel Channel
Group Group
Value unsigned Float
Gmode – Gating Mode
This command selects/reports the setting of gating mode.
Command Form: DEVICE Gmode <Channel> [Value]
argument Type
Channel Channel
Group Group
Value unsigned integer
values
See Groups and channels
1, 2, 3, 5, 7, 12, 16, 17 (i, o, m, p , l, F, T, r)
-99.90 – 99.90 **
(null to query in text)
A = Absolute
r = relative
null = relative
size values
4 Bits 0 – 7 represent gate status on mics 1 – 8
(null sent in text, Value returned)
size values
1 See Groups and channels
1 3 (m)
2 0.10 – 8.00
(null to query in text)
size values
1 See Groups and channels
1 3 (m)
2 1 = Auto
2 = manual on
3 = manual off
(null to query in text)
Units
dB
Units
Units
S
Units
Appendix A: Serial Commands 223