Thank you for choosing a Peg-Perego
product.
Product characteristics
• The "Primo Viaggio SL" group 0+ car seat has been
subjected to all safety tests and is type approved under
European standard ECE R44/04, for children weighting
from 0 to 13 kg (0 to 12-14 months).
•
IMPORTANT: Primo Viaggio SL must be installed
in a rearward-facing position on seats without
airbags. Do not install it on rearward- or sideways-
facing vehicle seats.
• It comes with an "Adjustable Side Impact Protection
System". This offers improved protection against side
impacts with the "simultaneous system" for headrest-
harness adjustment.
• It is type approved for installation in vehicles without a
base support or with two types of base, as required (the
use of a seat base offers improved safety): "Belted Base"
or "Isofix Base" (check that the vehicle is fitted with the
Isofix system - a list of vehicle models fitted with the
system is provided with the product).
WARNING
• Read the instructions carefully before use and keep
them in the holder provided for future reference.
Failure to closely follow the car seat installation
instructions will put your child at risk.
• Never leave the child unattended.
• Always use the restraint system.
• The assembly and installation operations must be
conducted by adults.
• Avoid inserting fingers into the mechanisms.
• Install this group 0+ car seat in a rearward-facing
position.
• Death or serious injury can result if this car seat is
installed on seats with airbags.
• In the case of swivel or repositionable vehicle seats,
only install this car seat in a rearward-facing position.
• When travelling take special care to make sure that
luggage or other objects do not injure the child in the
car seat in the case of accidents.
• Do not use installation methods different from those
indicated. This would result in the risk of detachment
from the seat.
• Car seat, group 0+, "Universal" category, type approved
under European standard ECE R44/04 for children of
weight from 0 to 13 kg (0 to 12/14 months). Suitable for
installation on the majority of vehicle seats, but not all.
• Group 0+ car seat with class E Semi-Universal Isofix base
(accessory).
• The car seat can be correctly installed if the vehicle's
use and maintenance manual indicates compatibility
with "Universal" group 0+ restraint systems.
• This car seat is classed as "Universal" in compliance with
stricter type approval criteria than previous models that
do not have type approval labels.
• The car seat can only be used in type approved
vehicles, fitted with static or inertia-reel three-point
seatbelts, approved under regulation UN/ECE no. 16
17