Bluetooth Settings - JVC KD-ADV7490 Manual De Instrucciones

Bluetooth settings

You can change the settings listed on the right column
according to your preference.
• When is shown on the display, you can
move back to the previous screen by pressing number
button 3.
1
Select "BT-PHONE" or "BT-AUDIO."
2
Enter the Bluetooth menu.
3
Select "Setting."
4
Select a setting item.
*
1 Displayed only when a Bluetooth phone is
connected.
*
2 Appears only when a Bluetooth phone is
connected and it is compatible with text message
(notified through JVC Bluetooth adapter).
*
3 Bluetooth Audio: Shows only "Version."
5
Change the setting accordingly.
Setting menu ( : Initial)
Auto Connect
When the unit is turned on, the connection is
established automatically with...
Off: No Bluetooth device.
Last: The last connected Bluetooth device.
Order: The available registered Bluetooth device
found at first.
Auto Answer
Only for the device being connected for "BT-PHONE."
On: The unit answers the incoming calls
automatically.
Off: The unit does not answer the calls
automatically. Answer the calls manually.
Reject: The unit rejects all incoming calls.
Message Info
Only for the device being connected for "BT-PHONE."
Auto: The unit informs you of the arrival of
a message by ringing and displaying
"Received Message."
Manual: The unit does not inform you of the arrival of
a message.
MIC setting (microphone setting)
Only for the device being connected for "BT-PHONE."
Adjust the built-in microphone volume,
[LEVEL 01/02/03].
Version
The Bluetooth software and hardware versions are
shown.
SETTINGS 51