Preparation
Cancel the display demonstration and set the clock
• See also pages 44 and 45.
1
2
3
4
Changing the display information and pattern
When the power is turned off: Check the current clock time
Ex.: When tuner is selected as the source
Source operation display
• If a station has been assigned a title, station
title appears after about 5 seconds.
• To assign a title to a station, see page 52.
Turn on the power.
Enter the PSM settings.
Cancel the display demonstrations
Select "Demo," then "Off."
Set the clock
Select "Clock Hr" (hour), then adjust the hour.
Select "Clock Min" (minute), then adjust the minute.
Select "24H/12H," then "24Hours" or "12Hours."
Finish the procedure.
Audio level meter display
(see "LevelMeter" on page 44)
INTRODUCTIONS
7