Installation And Putting Into Operation; Scope Of Delivery; Connecting The Printer To The Power Supply - Mettler Toledo P-56RUE Manual De Usuario

2 Installation and Putting into Operation

Finding more information

2.1 Scope of delivery

The following accessories are part of the equipment:
P-56RUE or P-58RUE thermal printer
•
Set of paper rolls
•
Universal AC adapter
•
Country-specific power cable
•
USB cable
•
RS232 cable
•
User Manual
•
Declaration of conformity
•
CD-ROM (containing documents in different languages, software and drivers)
•

2.2 Connecting the printer to the power supply

1 Connect the AC adapter to the connection socket on
the back of the printer.
2 Lock the connector with the screw nut.
3 Connect the 3-pin grounded power cable to the socket
for the AC adapter.
4 Connect the power cable to the mains.
5 Switch the printer on.
14 Installation and Putting into Operation
Additional information about this printer can be found in the Operating Instructions on the CD-
ROM or online.
WARNING
Risk of electric shock
1 Do not open the AC adapter housing. Make sure that the AC adapter does not come in
contact with liquids.
2 Use only the 3-pin power cable with equipment grounding conductor which was supplied
with your instrument and only a 3-pin grounded outlet must be used.
NOTICE
Use only the original AC adapter delivered with your printer.
− Do not try to use this AC adapter for other METTLER TOLEDO instruments, otherwise they
could be damaged.
Printer