Inserting The Paper Roll - Mettler Toledo P-56RUE Manual De Usuario

2.3 Inserting the paper roll

Danger of burns
The thermal printhead is getting hot during the printing process. Wait until the printhead has
cooled down before opening the printer cover.
Note
We recommend to use only specified paper from METTLER TOLEDO, see Accessories and spare parts in the
Operating Instructions.
1 Switch on the printer.
2 Press down the release key.
ð The printer cover opens.
3 Insert the paper roll into the printer frame.
Note
The paper roll must unroll in the correct direction (see
picture).
4 Make sure that the paper is in the middle of the paper
guides.
5 Close the printer cover. Firmly press down until it
snaps.
6 Press the paper feed key
Printer
CAUTION
to check the paper feed.
Installation and Putting into Operation 15