Disposal; Warranty; Eu Declaration Of Conformity - Protool IDC 15-2 TEC Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 28

12 Disposal

Return used or faulty battery packs to your
local specialist retailer, PROTOOL after-sales
service or a designated public waste man-
agement facility. The battery packs will then
be recycled.
EU only: European Directive 2006/66/EC
stipulates that faulty or used battery packs/
batteries must be recycled.
Do not throw the power tool in your house-
hold waste! Dispose of machines, accesso-
ries and packaging at an environmentally
responsible recycling centre. Observe the
valid national regulations.
EU only: European Directive 2002/96/EC
stipulates that used electric power tools
must be collected separately and disposed
of at an environmentally responsible recy-
cling centre.

13 Warranty

For our tools, we give warranty for material
and production defects in accordance with
the locally applicable legal provisions, but
in any case for at least 12 months. Within
the EU member states, the warranty period
is 24 months (verifi cation through invoice
or delivery note).
Damage caused by, in particular, natural
wear, overloading, incorrect handling, or
damage caused by the operator, or dam-
age caused through use of the equipment
contrary that specifi ed in the Operating In-
structions, or damage which was known at
the time of purchase, is not covered by the
warranty. Furthermore, damage caused by
the use of non-original PROTOOL accesso-
ries and consumable material (e.g. sanding
pads) is also excluded.
Complaints can only be recognised if the tool
is returned while still assembled to the sup-
plier or an authorised PROTOOL Customer
Service workshop. Keep the Operating In-
structions, Safety Instructions, Spare Parts
List and purchase receipt in a safe place.
Otherwise the respective, current warranty
condi tions of the manufacturer shall apply.
Note
Due to continuous research and develop-
ment work, we reserve the right to make
changes to the technical content of this
documentation.
14 EU Declaration of
Conformity
We solely declare that this product conforms
with the following standards and normative
documents:
EN 60745, EN 55014, EN 61000, EN 60335
in accor dance with the regulations stipu-
lated in Directive 98/37/EC (until 28 Dec.
2009), 2006/42/EC (from 29 Dec. 2009),
2004/108/EC, 2006/95/EC.
08
Manfred Kirchner
Research and development
Protool GmbH
Wertstr. 20
D-73240 Wendlingen
31.7.2008
19

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Iwc 18-2 tec

Tabla de contenido