Planos De Control - Mettler Toledo M400 PA Manual De Instrucciones

Transmisor M400 PA
© 06/2016 Mettler-Toledo GmbH, CH-8606 Greifensee, Suiza
Impreso en Suiza
El aparato intrínsecamente seguro de los transmisores multiparamétricos M400 FF y M400 PA,
versión de concepto de entidad / bus de campo de seguridad intrínseca, se comercializa con
la etiqueta de marcado siguiente:
Intrinsically Safe Version
SÉCURITÉ INTRINSÈQUE, Exia
C/US IS/I,II,III/1/ABCDEFG/T4A
US I/O/AEx ia/IIC/T4
C I/O/Ex ia/IIC/T4
Entity, FISCO
WARNING - EXPLOSION HAZARD, DO NOT REMOVE OR REPLACE WHILE CIRCUIT IS LIVE WHEN A FLAMMABLE OR
COMBUSTIBLE ATMOSPHERE IS PRESENT.
WARNING - POTENTIAL ELECTROSTATIC CHARGE HAZARD. USE ONLY DAMP CLOTH WHEN CLEANING OR WIPING.
DO NOT USE SOLVENT.
AVERTISSEMENT - RISQUE D'EXPLOSION, NE PAS DÉBRANCHER TANT QUE LE CIRCUIT EST
SOUS TENSION; À MOINS QU'IL NE S'AGISSE D'UN EMPLACEMENT NON DANGEREUX.
Mettler-Toledo GmbH
Im Hackacker 15 (Industrie Nord), CH-8902 Urdorf, Switzerland
Modelo de etiqueta M400 PA
2.4.1.3

Planos de control

Consulte el apartado «16.6 Planos de control» de la página 124.
Enclosure Type 4X IP66
–20°C ≤ Ta ≤ + 60°C
Control Drawing No. 12112603
1)
P/N: xxxxxxxx
Entry thread: Metric, 5xM20;
NOTE:
1. Conduit Hubs / Fittings Entry Thread;
2. Must use minimum Class I, Division 2, Groups A, B, C,
D, Type 4X and IP66 suitable Hubs/Fittings & Cable
Glands to fulfill the complete FM certification.
Operation Manual No. 30078302 for M400 FF
No. 30134634 for M400 PA
Made by METTLER TOLEDO in China www.mt.com
Transmisor M400 PA
30 134 638
18