Never charge your phone using the X-LINK magnetic connection and the USB
connection at the same time, or it may shorten the life of your phone's devices.
1. Open the watertight plug and connect the USB cable to the USB power adapter, then
plug the end of the USB cable into the USB port.
2. Plug the USB power adapter into an electrical outlet.
3. When the battery is fully charged, unplug the phone from the charger. First unplug the
charger from the device, then unplug it from the electrical outlet.
Energy-saving mode
This feature limits your phone's performance to basic functions (calls, SMS/MMS, internet
and SOS + 4 programmable functions). The screen changes to black and white to reduce
power consumption.
Accessible and configurable via:
Settings > battery > (top right of the screen) > Energy-saving mode
Or: via the shortcut in the notification bar (by swiping from the top to the bottom of the
screen), on the second page, icon > energy-saving mode.
To disable the energy-saving mode, click on > Disable energy saving mode.
BATTERY SAVER MODE:
This mode is less restrictive than the "energy-saving" mode. It dims the screen of your
phone and limits CPU performance to conserve battery power.
Accessible via the notification bar (by swiping from the top to the bottom of the screen),
energy-saving mode icon.
To disable this mode, press the same icon again. If you hold down this icon for a few
seconds, you will see information about your battery status.
Tips and precautions for charging your battery
The battery is built into the phone and is not removable. Do not remove the battery
yourself.
• Use only approved chargers, batteries and cables. Using unapproved chargers or
cables may cause the battery to explode or damage the phone.
• Avoid using your phone while charging. Do not cover your phone or the power adapter.
• Incorrect charger connection could seriously damage your phone. Any damage caused
by misuse is not covered by the warranty.
• If the AC power is lower, your phone may take longer to charge.
44