Installation Instructions; Instructions For Care; Warranty Card - Camargue 26930370 Instrucciones De Montaje

materials. Dispose it in an environmentally
suitable manner.
Do not throw the product into the normal
domestic waste at the end of its service life,
but ask your municipal administration about
the possibility of an environmentally friendly
disposal.

Installation Instructions

• Check all connections carefully after first-time
use to make sure that they are tight.
• We do not assume any warranty for incor-
rect installation - in particular for subsequent
damages!

Instructions for care

Sanitary taps require special care. Therefore,
please observe the following instructions:
• Chrome-plated surfaces are sensitive to lime-
dissolving agents, acidic cleaning agents and
all kinds of abrasives.
• Never clean coloured surfaces with abrasive,
corrosive, or alcoholic agents.
• Only clean your taps with clear water and a
soft cloth or a shammy.
• Please make sure that no detergent is allowed
to enter the cartridge enclosure as this can
cause the lever to become stiff and cause
noises.
Maintenance
• Please check all joints and connections for
leaks or visible damages at regular intervals.
• In case of any leaks or visible damages to
the fitting or connection hoses, these should
be immediately checked by a specialist and
replaced if necessary.
Decommissioning
• Cut off the water supply before dismantling
the product.
• Pay attention to escaping residual water.
• Disassemble the product in the reverse order
of the assembly instructions.
 The illustrations are to be considered as
figurative representations, deviations of
the product are possible. Subject to
technical modifications.

WARRANTY CARD

The BAHAG AG shall take on a manufacturer's
warranty for the product you have procured
in accordance with the warranty conditions
stated below. Your legal warranty claims from
the purchase contract with the seller and your
legal rights shall not be limited by this war-
ranty.
Warranty conditions:
1. Scope of warranty
The BAHAG AG shall grant a warranty for
proper material qualities and material process-
ing in accordance with the intended purpose
as well as professional assembly, tightness
and function. The warranty shall only apply
for the country in which the product has been
procured.
Included within the scope of the warranty is a
guarantee, reduced to 1 year, for the durabil-
ity of non-high-gloss chrome-plated surfaces,
such as bronzed or coloured surfaces.
Excluded from the warranty are the following:
• Damages due to improper assembly, commis-
sioning and handling
• Damages due to external influences such as
34