SOMFY RGB LED Receiver io Instrucciones página 5

RGB LED Receiver io
mm
2
Ø ≥ 1
B
A
Wire 1 RGB LED light: Red
Wire 2 RGB LED light: Green
Wire 3 RGB LED light: Blue
Wire 4 White LED light
Wire 5 V+
Warning
If a single LED light is connected, insulate the unconnected wires of the io RGB LED receiver
using individual protection.
3) Secure the io RGB LED receiver (using cable retainers, for example).
4) Connect the 12 V or 24 V power supply unit to the mains.
2.2. COMMISSIONING
This guide only describes commissioning using a 1W io control point.
For commissioning using any other io control point, refer to the corresponding guide.
LED on LED off
2.2.1. Programming the first 1W Somfy io control point for an LED light
͉
͉
To distinguish the LED lights during programming, the coloured LED light is lit red in programming
mode.
1) Switch on the power supply.
Copyright © 2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
A
LED position "my" Variation of light
B
Blue wire
Brown wire
Colour variation
intensity
EN
0 V
+12/24V
ON
5