Dimmer; Stop/My Button; Favourite (My) Position Settings; Adding/Deleting Io Control Points - SOMFY RGB LED Receiver io Instrucciones

RGB LED Receiver io

3.2. DIMMER

To increase or reduce the light intensity of the LED light:
- Turn the dimmer wheel until the desired light intensity is
reached.

3.3. STOP/MY BUTTON

To switch the LED light on directly in the preset my position
(favourite light intensity for the white LED light, favourite light
intensity and colour for the coloured LED light (default setting of
50% and red for the coloured LED)):
- Press the my button.
͉
͉
To change or delete the favourite position (my), see 3.4.

3.4. FAVOURITE (MY) POSITION SETTINGS

3.4.1. Modifying the favourite position (my)
1) Press the my button to switch the LED light on in the preset
favourite position.
2) Adjusting the light intensity.
3) Select the colour (of the coloured LED light).
4) Once you have reached the desired light intensity, press the my
button until the LED comes on then goes out.
The new favourite position has been programmed.
The LED light comes on again with the intensity and the colour
selected.
3.4.2. Deleting the favourite position (my)
1) Press the my button to switch the LED light on in the preset
favourite position.
2) Now press the my button until the LED light comes on then
goes out.
The favourite position has been deleted.

3.5. ADDING/DELETING IO CONTROL POINTS

Refer to the corresponding guide.
Copyright © 2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
EN
9