AEG KDK911422 Manual De Instrucciones página 5

manufacturer cannot be held responsible for damage
resulting from fitting or connecting errors.
 WARNING! The electrical safety of the appliance can
only be guaranteed if it is earthed. The manufacturer
cannot be held responsible for damage resulting from
the absence of or defects in the installation's protection
system (e.g. electrical shock).

WARNING! Only use the appliance once it has been
fitted into its built-in position. Only in this manner can it
be guaranteed that users cannot access the electrical
components.

WARNING! Never open up the appliance's frame.
Possible contacts with electrical conducting parts or
changes to electrical or mechanical components may
represent a danger to users' safety and prejudice the
correct working of the appliance.
1.4. Cleaning

Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass since they can
scratch the surface, which may result in shattering of
the glass.
 Do not use steam cleaners to clean the appliance.
 Do not use high pressure or steam jet cleaning devices.
The steam may affect electrical components and cause
a short circuit. The steam pressure may also cause
damage to the appliance's surface and components in
the long term.
1.5. Repairs
 Disconnect the appliance from the power supply before
carrying out any maintenance operation.

WARNING! The appliance must be disconnected from
the electrical current when installation and repair work
is being done. To disconnect the appliance from the
current, one of the following conditions must apply:
The switchboard fuses / circuit breakers must be
-
disconnected.
The plug should be removed from the socket. To
-
remove the plug from the socket do not pull on the
electric cable but rather pull out the plug itself directly.
ENGLISH 5