Restoring The Original Configuration - SOMFY MAESTRIA+ 50 RTS Instrucciones

EN
2. 4. 3. Restoring the original configuration
Only switch off power (double cutout) for the driven product to be
reset.
This reset deletes all programmed control points, sensors and
end limit settings and resets the driven product's favourite (my)
position.
1) Position the driven product at its half-way position.
2) Cut the power supply for 2 seconds.
3) Switch the power supply back on for 5 to 15 seconds.
4) Cut the power supply for 2 seconds.
5) Switch the power supply back on: the driven product moves for a
few seconds.
6) Press the PROG button on the Somfy local control point for ≈ 7 s
until the driven product moves up and down two times: the drive is
reset to its original configuration.
10
Non contractual images
1)
5 sec.
3)
ON
15 sec.
5)
ON
6)
Copyright © 2017 Somfy SAS. All rights reserved.
2)
OFF
2 sec.
4)
OFF
2 sec.
my