Operation And Maintenance; Up" And "Down" Functions; Stop Function; Favourite My Position - SOMFY MAESTRIA+ 50 RTS Instrucciones

3. OPERATION AND MAINTENANCE

This drive does not require any maintenance operation.

3. 1. "UP" AND "DOWN" FUNCTIONS

- Briefly press the "Up" or "Down" button: the driven product raises
or lowers.

3. 2. STOP FUNCTION

The driven product is moving.
- Press the "my" button: the driven product stops.

3. 3. FAVOURITE MY POSITION

A slightly open position, referred to as the "favourite (my) position", other than the fully up or fully down position,
is programmed by default in the drive.
- To activate this function, the drive must have performed one
complete cycle.
3. 3. 1. To modify the favourite (my) position
1) Set the driven product to the desired favourite (my) position.
2) Press the "my" button until the driven product moves up and down
briefly: the new favourite (my) position is programmed and the old
favourite (my) position is deleted.
It is not possible to save a favourite position close to the end limit
positions.
3. 3. 2. To use the favourite (my) position
The driven product must be stopped.
- Press the "my" button: the driven product moves to the favourite
(my) position.
3. 3. 3. Deleting the favorite position (my)
If the Catching system is activate, it will not be possible to erase the "favourite (my) position".
1) Press the "my" button: The awning moves and stops in the favorite position (my).
2) Press the "my" button again until the awning makes a movement: The favorite position (my) has been deleted.

3. 4. FABRIC TENSION

Fabric tensioning is possible only at the lower end limit with driven products equipped with catches.
3. 4. 1. Driven product with automatic catching system
Fabric tensioning is always active with a driven product equipped with an automatic catching system.
To draw the fabric taut
- Press the "Down" button: the driven product lowers. When it reaches
the lower end limit, the driven product raises automatically to draw
the fabric taut.
If the fabric is drawn too tightly or not enough, consult a home
motorisation and automation professional to adjust the fabric
tension.
To raise the driven product at the upper end limit
- Press the "Up" button. The driven product starts by moving
downward to release tension on the fabric, then raises to the upper
end limit.
Copyright © 2017 Somfy SAS. All rights reserved.
1)
my
Non contractual images
EN
2)
my
1
P
2
P
1
P
2
P
11